欧美黄色一级二级三,欧美在线好看的短视频,在线观看免费视频日韩,免费直接看的黄片

Jiangsu Junde Medical Equipment Technology Co., Ltd. website!

Phone:+86-18121799888
中文

NEWS CENTRE


Your Current Location:Home> News> Industry News

Selection points of masks

Release Time:2021-8-16 16:56:40      Hits:830

Dust blocking efficiency


The dust blocking efficiency of a mask is based on its blocking efficiency for fine dust, especially for respirable dust below 2.5 microns. Because the dust of this particle size can directly enter the alveoli, which has an impact on human health. The principle of dust blocking of gauze masks is mechanical filtration, that is, when dust hits the gauze, it passes through layers of barriers, blocking some large particles of dust in the sand cloth. For some fine dust, especially dust less than 2.5 microns, it will pass through the mesh of the gauze and enter the respiratory system. Dust-proof masks are composed of activated carbon fiber mats or non-woven fabrics as filter materials. Respirable dust less than 2.5 microns is blocked during the process of passing through this filter material to filter the air.


Degree of tightness


The anti-side leakage design of the mask is a technical requirement to prevent air from being sucked through the gap between the mask and the human face without being filtered. Air is like water flow, where the resistance is small, it flows first. When the shape of the mask is not close to the human face, the dangerous objects in the air will leak in from the leak and enter the human respiratory tract. So, even if you choose a mask with the best filter material. Nor can it protect your health. Many foreign regulations and standards stipulate that workers should regularly conduct mask tightness tests. The purpose is to ensure that workers choose masks of the right size and wear masks in the correct steps.


Suitable to wear


In this way, workers will be willing to insist on wearing them in the workplace and improve their work efficiency. The maintenance-free masks in foreign countries do not need to be cleaned or replaced. When the dust barrier is saturated or the mask is damaged, it will be discarded. This not only ensures the hygiene of the mask, but also saves the workers the time and energy to maintain the mask. In addition, many masks adopt arched shapes, which can not only ensure a good fit with the face shape, but also retain a certain amount of space in the mouth and nose, which is suitable for wearing.


Discomfort people


People with heart or respiratory problems (such as asthma and emphysema), pregnant, dizziness after wearing, difficulty breathing, and skin sensitivity.


Previous: Before the first mask is to be noted Abstract hand hygiene, order picking mask follows:
Next:NO!

Back to list

News you may be interested in
Copyright ? 2021 all rights reserved:Jiangsu Junde Medical Equipment Technology Co., Ltd.